JVC BR-DV6000U User Manual - Page 77

Ⅵ REMOTE (2/2) Menu screen (continued) REMItOemTsE menuSetting Description PB START DELAY ⅷ 0F | 15F For adjusting the edit timing. With the remote controller in use, if the start points of edit are not concurrent, adjust the playback startup timing: 0F : No correction. 1F to 15F : Delays the timing by the number of frames set by the user. When BR-DV6000 is connected to an editing remote controller with no bump function, use this setting to adjust the editing precision. SYNCHRONIZATION OFF ⅷ ON For enabling/disabling the bump function when BR-DV6000 is connected to an editing remote controller: OFF : No synchronization. ON : Performs synchronization. The editing precision is enhanced. Please set the pre-roll time to at least 7 seconds. CONTROLLER SEL ⅷ TYPE1 TYPE2 TYPE3 TYPE4 TYPE5 TYPE6 TYPE7 For setting the type of controller to be connected when remote control is enabled with the RS-422A interface: TYPE1 : RM-G820 TYPE2 : RM-G860 (set the preroll time to at least 10 seconds) TYPE3 : AG-A850 TYPE4 : RM-450,PVE-500 TYPE5 - TYPE7 : (Not in use) FOOT SW ⅷ OFF L EDGE H EDGE L LEVEL For setting when an external switch (e.g., a footswitch) is con- nected to the SERIAL REMOTE terminal. Before operating an external switch (footswitch) with L EDGE or H EDGE, turn BR- DV6000 to the RECORDING PAUSE or RECORDING mode: OFF : For when the external switch is not used. L EDGE : Recording and recording pause is switched at the LOW edge of the external switch signal. H EDGE : Recording and recording pause is switched at the HIGH edge of the external switch signal. L LEVEL : Record at the LOW edge and pause recording at the HIGH edge of the external switch signal. PAGE BACK Return to the REMOTE (1/2) Menu screen. 77