JVC BR-DV6000U User Manual - Page 4
Main Features - ntsc
UPC - 046838325557
View all JVC BR-DV6000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Thank you for purchasing our DV Video Cassette Recorder BR-DV6000. As this is a DV-format video cassette recorder, video cassettes with the or logo can be used with it. DVCAM cassettes can be recorded in the DV format. ● In order to prevent crumpling due to tape slack, do not perform important recording within the first and last 2 - 3 minute-run of the tape. ● Recorded video (sound) is meant for personal entertainment only and must not be used for other purposes without the prior consent of the copyright owner. ● JVC shall not guarantee the quality of recording and playback should BR-DV6000 fail to function normally due to defects, either of the unit itself or the video cassette tapes. MAIN FEATURES ● DV format High picture and sound quality by digital technology. ● Compatible mechanisms for standard/mini DV cassette tapes It records on and plays back DV cassette tapes of the standard and mini size. (SP mode only) Recording in the DV format can be performed on DVCAM cassette tapes. ● Only PAL/NTSC DVCAM tapes are detected automatically in playback mode. ● Equipped with composite, component and Y/C input & output terminals. ● Equipped with DV IN/OUT terminals. (IEEE1394) It can exchange digital signals with IEEE1394-compatible devices. ● Both NTSC and PAL signals supported BR-DV6000 can playback or record PAL tapes through the DV input. For PAL, please set the PB/DV IN menu item to PAL. For analog signal input, only NTSC is supported. ● RS-422A and JVC bus interface supported RS-422A-compatible edit controller RM-G820 and JVC bus-compatible edit controller RM-G800/G805 can be used for editing. ● Optionally, the RS-232C interface can be used. ● Recording and playback of time codes ● Time code I/O terminal Slave lock is allowed if BR-DV6000 is connected to an external time code generator. ● SYNC IN terminal External synchronization signals can be input. ● Audio-dubbing function (after-recording) If the sampling frequency is 32 kHz, audio dubbing can be performed into CH3 and CH4 (except during DV input). ● Backup recording function With the combined use of other DV machines, long-time continuous recording is possible. ● Using the SERIAL REMOTE OUT terminal or DV terminal, dubbing with other recorders is possible only with playback operation by BR-DV6000. (Replication function) ● Equipped with a 2.5-inch color LCD Images, status display and menu display can be viewed. ● Multi-cue up Up to 5 points of the tape position can be registered and cued up. ● Index/blank search function It can search for positions where index signals are recorded and unrecorded parts. ● Repeat play function There are 3 types of repeat function. (INDEX/ VIDEO END/ TAPE END) ● Recording/playback with an external timer ● With the use of the network board SA-DV6000 (sold separately), image and audio streaming data can be recorded on a CF card, and with a LAN card, streaming data can be transmitted to a PC. ● With the XLR IN board SA-X61U or XLR OUT board SA-X62U (sold separately), audio input/output via the XLR terminal is possible. 4