JVC BR-DV6000U User Manual - Page 35
Notes
UPC - 046838325557
View all JVC BR-DV6000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
CONNECTION - Connecting the AC adapter - Connect the supplied AC adaptor to BR-DV6000. Supplied power cord Screw Supplied AC adaptor Clamp DC cord VIDEO LINE Y/C COMPONENT IN R-Y B-Y Y OUT REMOTE2 IN OUT AUDIO CH 1/3 CH 2/4 IN MONITOR OUT SIGNAL GND DC12V SYNC IN IN DV IN/OUT TIME CODE OUT IN OUT OFF REC PLAY SERIAL REMOTE TIMER OUT MONITOR OUT DC IN terminal TIMER switch REMOTE1 OPERATE indicator ONAL DV6000 OPERATE A.DUB REC PLAY PAUSE OPERATE button EJECT REW STOP FF AUDIO INPUT COUNTER MONITOR OUTPUT SELECT CTL L CH-1/2 DV TC MIX MIX LINE UB R CH-3/4 Y/C (CPN) REMOTE LOCAL Memo ● Even in the OPERATE OFF mode, a small amount of electricity will still flow into the unit. ● When the unit is in the OPERATE OFF mode, no operation can be performed except that of the OPERATE buttons and cassette loading/ejecting. Ⅵ Before connecting the AC adaptor, ensure that the TIMER switch is set to "OFF". (Refer to "Notes" below.) 1. Connect the DC cord of the AC adapter to the DC IN terminal of BR-DV6000. 2. To prevent accidental disconnection of the DC cord, fasten the DC cord with a clamp. 1Remove the screw and the clamp shown in the above figure. 2Insert the DC cord into the clamp and fasten the clamp unto the unit. 3. Connect the supplied power cord to the AC IN terminal of the AC adapter. 4. Connect the power cord to the power outlet. • BR-DV6000 is turned on and the OPERATE indicator lights up in red. (OPERATE OFF mode) • If DC IN MODE of the SYSTEM (2/2) Menu screen is set to "OPE ON", the OPERATE indicator will light up in green. (OPERATE ON mode) Notes LOW VOLTAGE Alarm message • Supply power to BR-DV6000 using the supplied AC adapter. Do not use other power sources. • Do not unplug the DC cord and/or the power cord during recording or playback. • If the supply voltage is low, an alarm display of "LOW VOLTAGE" is shown. • If the TIMER switch is set to REC or PLAY, recording or playback begins when power is supplied to the DC IN terminal. When the AC adapter is connected, ensure in particular that the TIMER switch is not set to REC. Set the TIMER switch to REC or PLAY only when an external timer function is used. 35