JVC BR-DV6000U User Manual - Page 54

PLAYBACK - Multi cue-up - Using the time codes recorded on the tape, up to 5 points on the tape can be registered as cue-up points at the Multi Cue-up screen. The registered tape positions (cue-up points) can be searched. 8 button RESET button SET button Mini MENU DISP RESET SEARCH- SET SEARCH+ MIC HOLD BLANK CUE UP PHONES REC LEVEL CH-1/3 CH-2/4 PROFESSIONAL BR-DV6000 OPERATE A.DUB REC PLAY PAUSE EJECT REW STOP FF AUDIO INPUT COUNTER MONITOR OUTPUT SELECT CTL L CH-1/2 DV TC MIX MIX LINE UB R CH-3/4 Y/C (CPN) REMOTE LOCAL 9 button CUE UP button COUNTER switch Registering cue-up points Memo For details on time code setting and recording: (☞ Page 59) Cursor Cue-up point - - -MUL T I CUE UP - - - - - - CUE I 00 : 01 : 35 : 11 CUE 2 03 : 42 : 59 : 21 CUE 3 CUE 4 11 : 21 : 48 : 07 CUE 5 EX I T " SET " : ENTRY CUE DATA " RESET " : CLEAR CUE DATA " CUE UP " : EXECUTE CUE UP 1. Set the COUNTER switch to TC. 2. Load a tape with time codes recorded. 3. Press the CUE UP button. ¥ The CUE UP screen appears on the monitor or the LCD. 4. Perform playback or search. At the position to be registered, set it to the STILL or STOP mode. 5. Press the 8 or 9 button to bring the cursor to the cue-up point. Press the SET button. ¥ Register the time code data of the current position as a cue-up point. • If no tape is loaded, "00" is registered. • Cue-up points can be registered while the tape is being played back. 6. To register more cue-up points, repeat steps 4 and 5. Up to 5 cue-up points can be registered. Clearing registered cue-up points Press the 8 or 9 button to bring the cursor to the cue-up point to be cleared. Press the RESET button. ¥ After a cue-up point is cleared, "- -" is displayed. Multi Cue-up screen 54