JVC BR-DV6000U User Manual - Page 99
OTHERS, Troubleshooting
UPC - 046838325557
View all JVC BR-DV6000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
OTHERS - Troubleshooting - Symptom No power. Action Is the AC adapter correctly connected? Unable to record. Is the slide of the cassette tape turned to "REC"? Set it to "REC" if it is at the "SAVE" position. The operation buttons of BRDV6000 do not work. Is OPERATION LOCK of the SYSTEM (2/2) menu set to ON? Set it to OFF if the operation buttons are to be used. For REMOTE, select the buttons that can be operated with the LOCAL FUNCTION Menu. Editing cannot be controlled even after the REMOTE/LOCAL switch is set to REMOTE. To control with RS-422A, set REMOTE SEL 9-PIN in the REMOTE (1/2) Menu screen to "ON". To control with the JVC bus, set REMOTE SEL JVC to "ON". Noise is produced on the playback video. Playback sound interrupted. • The tape is damaged. Replace the tape. • The head is dirty. Clean it with the specified head-cleaning tape. (Page 8) Time codes are not correctly Is TC DUPLICATE in the TC/UB/CLOCK (1/2) Menu screen recorded during DV signal input. correctly set up? Unable to turn on the power with Isn't the REMOTE/LOCAL switch set to REMOTE when LO- the OPERATE button. CAL FUNCTION in the REMOTE Menu screen is not set to ALL KEYS? Serial remote control does not function. Isn't REMOTE SEL SER in the REMOTE (1/2) Menu screen set to OFF? For serial remote control, set it to ON or LOC+REM. Unable to operate BR-DV6000 with the DV terminal. Isn't REMOTE SEL DV in the REMOTE (1/2) Menu screen set to OFF? To operate with the DV terminal, set it to ON or LOC+REM. When the power is turned on, the unit goes into the REC or PLAYBACK mode. The TIMER switch on the rear panel is set to REC or PLAY. Check the setting of the TIMER switch before turning on the power. 99