JVC BR-DV6000U User Manual - Page 52

PLAYBACK - Search function - Index search This function searches to the position where the index signal is recorded. Mini MENU DISP RESET SEARCH- SET SEARCH+ MIC HOLD BLANK CUE UP PHONES REC LEVEL CH-1/3 CH-2/4 PROFESSIONAL BR-DV6000 SEARCH- SEARCH+ button button Monitor screen INDEX+1 Index search progressing: displayed on the screen (The number denotes the corresponding index position.) :Setting: Set ";, :" KEY FUNC in the SYSTEM (1/2) Menu screen to INDEX. :Operation: Ⅵ To search an index point in the forward direction from the current tape position: • Press the SEARCH + button. The index position to be searched can be specified by the number of times this button is pressed. (Max: 99) Ⅵ To search an index point in the reverse direction from the current tape position: • Press the SEARCH - button. The index position to be searched can be specified by the number of times this button is pressed. (Max: 99) Ⅵ When the SEARCH + or SEARCH - button is pressed, the unit fast-forwards or rewinds to the specified indexed position and start playing. Memo ● If the interval between index signals is less than one minute, the function may not work well. ● The specifications for index signal recording varies with the device used. Blank search This function searches unrecorded parts of the tape. Mini MENU DISP RESET SEARCH- SET SEARCH+ MIC HOLD BLANK CUE UP PHONES REC LEVEL CH-1/3 CH-2/4 PROFESSIONAL BR-DV6000 BLANK button Monitor screen Ⅵ In the STOP mode, press the BLANK button. ¥ • If the current position is at a recorded part of the tape, BRDV6000 fast-forwards until an unrecorded part is reached and stops there. • If the current position is an unrecorded part of the tape, BRDV6000 will first advance the tape in the forward direction for confirmation and thereafter rewind and go into the STILL mode at the last recorded position. • During a blank search, "BLANK SEARCH" is displayed on the monitor. BLANK SEARCH 52