JVC GY-DV300REM Instruction Manual - Page 11

TENTATIVE CONTROLS, INDICATORS AND CONNECTORS Left Side Section #7 MIC 1 IN MIC 2 IN EARPHONE DV Y/C OUT LINE CH-2 OUT CH-1 VIDEO OUT #6 #2#5#4 #3 #1 The playback sound from the built-in speaker is not output when an earphone is plugged into this jack. Y [DV] DV connector (U MODEL) Using a DV cable (optional), a digital video component with DV connector can be connected here. To record DV signals (IEEE1394 signals) from this connector, the MODE switch H should be set to "VTR". Y [DV] DV connector (E MODEL) Using a DV cable (optional), a digital video component with DV connector can be connected here. This connector is used for output of the DV signal or input the VCR contorl signal from the digital video component with DV connector. The use this connector, set the MODE switch H to "VTR". Memo: The GY-DV300 is not capable of recording DV signals (IEEE1394 signals). U [VIDEO OUT] Video output connector (RCA) Output connector for composite video signal. Outputs the input video signal and playback picture. ● When the OUTPUT CHAR. item on the DISPLAY [2/2] menu screen is set to MIX, onscreen-indicators like those shown on the LCD monitor screen can be output (black and white display). ● When the SETUP item on the SYSTEM [2/2] menu screen is set to ON, signals with setup information can be output. (black and white display) (U MODEL) V [Y/C OUT]Y/C video output connector (4-pin) Separate YC video signal output connector. Outputs the input video signal and playback picture. ● When the OUTPUT CHAR. item on the DISPLAY [2/2] menu screen is set to MIX, onscreen-indicators like those shown on the LCD monitor screen can be output (black and white display). ● When the SETUP item on the SYSTEM [2/2] menu screen is set to ON, signals with setup information can be output. (black and white display) (U MODEL) ● When the ASPECT item is set to LETTER on the SYSTEM [2/2] menu screen, an ID signal for identifying the wide-screen aspect is output. W [CH-1/CH-2 LINE OUT] CH-1/CH-2 audio output connector (RCA) Output connector for audio signal. In the shooting mode the input audio signal is output. In the VTR mode the playback sound is output. X [EARPHONE] Earphone jack This is a jack for connecting an earphone for monitoring the sound. Plug in an earphone or headphone with a 3.5 mm diameter plug. Monaural sound is output. Select the output sound with the MONITOR switch N. The volume of the monitor sound in the shooting mode is set with the EARPHONE LEVEL item on the TOP MENU screen. Z Cassette cover Sliding the EJECT switch located on the top section opens this cover to allow insertion or removal of the videocassette. The cover locks into place when it is closed after the cassette holder has been properly locked. ( See page 38.) Memo: • When inserting a cassette, push the "PUSH HERE" section on the cassette holder to lock the cassette holder correctly, and then close the cassette cover. • To prevent foreign matter from penetrating into the interior of the GY-DV300, never leave the unit with this cover left open. • The GY-DV300 does not function if the cassette cover is not closed. [ Microphone holder attachment base Use for attaching an optional microphone holder. Attach the optional microphone holder KA-A33 here. ( See page 36.) 18 19