Konica Minolta bizhub 181 bizhub 181 GDI Print Controler User Manual - Page 15
Procedures for making connections and installing the driver - user guide
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2 Installing the printer driver Connecting to the network In the following procedure, the machine is connected directly to the computer by using a network cable. In order to connect the machine to a network, the optional network interface card NC-503 or image controller IC-206 must be installed. For details on the network interface card NC-503, refer to the User's Guide for the network interface card. For details on the image controller IC-206, refer to the User's Guide for the image controller. When the machine is connected to a network, use the Add Printer Wizard to install the printer driver. For the procedure on installing the printer driver when this machine is connected to a network, refer to "Installing the printer driver by using the Add Printer Wizard" on page 2-13. Procedures for making connections and installing the driver The printer driver can be installed by using Plug and Play or by using the Add Printer Wizard. The installation procedure differs depending on the method used to make the connection. Use the installation method that corresponds with the connection method. 2 Reminder If the machine is to be connected to a USB port, install the driver by using Plug and Play. If the machine is to be connected to a network, install the driver by using the Add Printer Wizard. 2-2 GDI Printer Controller