Konica Minolta bizhub 181 bizhub 181 GDI Print Controler User Manual - Page 39
Reinstalling the printer driver by using the Add Printer Wizard
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2 Installing the printer driver 11 Select "LPT1:" as the port to be used, and then click the [Next] button. - In order to print on a network, the connection port must be set up as a network port. Since the port settings can be specified after installation, this procedure describes how to install the printer driver for a local connection. For details on specifying the port settings, refer to the User's Guide for the network interface card. 12 Click the [Finish] button. 13 After installation is complete, check that the icon for the installed print- er appears in the Printers window, and then remove the CD-ROM from the CD-ROM drive. This completes the installation of the printer driver. Reinstalling the printer driver by using the Add Printer Wizard 1 Uninstall the printer driver while the machine is not connected to the computer or while they are connected but the machine is turned off, and then restart the computer. - For details, refer to "Uninstalling the printer driver" on page 2-27. 2 Use the Add Printer Wizard to reinstall the printer driver. 2-26 GDI Printer Controller