Konica Minolta bizhub 181 bizhub 181 GDI Print Controler User Manual - Page 85

4 - Slide the paper guides to fit the size of paper being loaded. Control panel operations 4 Repeat step 3 as often as necessary until printing of the document is finished. 2 Note Be sure to load the paper into the manual bypass tray after the print operation is performed from the computer. Follow the procedure described below if the paper is loaded into the manual bypass tray before the print operation is performed from the computer. Remove the paper from the manual bypass tray. Press the [Reset] key. Press the [Printer] key. Perform step 3 of the procedure. Load the paper into the manual bypass tray one sheet at a time. If the multi bypass tray (optional) is installed, printing from it can be performed in the same way as with any other paper drawer since the multi bypass tray can be loaded with 100 sheets of paper. The multi bypass tray can be loaded with 10 envelopes, 20 OHP transparencies, 20 postcards, 20 label sheets or 100 sheets of plain paper. Power Save mode If print data is received while the machine is in Power Save mode, the mode is canceled. When print data is received, the data is printed after the machine has finished warming up. 4-8 GDI Printer Controller