Konica Minolta bizhub 28e bizhub 28e Scan Fax Guide - Page 119

ID check Tx ID check transmission limits fax transmission to when the lower four digits of the fax number you dialed and those registered in the destination machine match. NOTE • When using manual transmission (page 3-4), the ID check transmission function is disabled, even if you set it to ON. • When the lower four digits of the fax number registered in the other machine do not match the lower four digits of the number you entered, or when a fax number is not registered in the other machine, a communication error occurs and transmission fails. • Even if this setting is ON, you can set the ID check transmission OFF only for the next transmission when you set the setting off from the advanced settings. 1 Press [Setting] on My MFP Menu screen. If My MFP Menu screen is not displayed, press repeatedly until My MFP menu screen is displayed. 2 Press [Management]. If an administrator password is set, enter the password and press [Enter]. 3 Press [Security Communication]. 4 Press [ID Check Tx]. 5 Select [ON] to perform ID check transmission, and press [Enter]. Select [OFF] to deselect the setting. 6 Press [Close]. 4-22 Security fax functions