Konica Minolta bizhub 28e bizhub 28e Scan Fax Guide - Page 167
Press [Super G3]., Select [ON] to enable transmission with Super G3 or [OFF] with G3, and press
View all Konica Minolta bizhub 28e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
7 Press [Fax No.]. If you do not want to register a fax number, proceed to step 9. 8 Use the numeric keys to enter the fax number, and press [Enter]. Also register dialing options if you want to use them (page 3-10). 9 Press [e-mail]. If you do not want to register an e-mail address, proceed to step 11. 10 Enter the e-mail address, and press [Enter]. 11 Press [Super G3]. 12 Select [ON] to enable transmission with Super G3 or [OFF] with G3, and press [Enter]. 13 If "Mode 1" is set for the pin mode, press [PIN]. Otherwise, proceed to step 15. 14 Enter the PIN, and press [Enter]. 15 Press [Enter]. To continue to register or edit address book destinations, repeat the procedure from step 5. 7-4 Registering destinations
7-4
Registering destinations
7
Press [Fax No.].
If you do not want to register a fax number, proceed to step 9.
8
Use the numeric keys to enter the fax number, and press [Enter].
Also register dialing options if you want to use them
(page 3-10)
.
9
Press [e-mail].
If you do not want to register an e-mail address, proceed to step 11.
10
Enter the e-mail address, and press [Enter].
11
Press [Super G3].
12
Select [ON] to enable transmission with Super G3 or [OFF] with G3, and press
[Enter].
13
If “Mode 1” is set for the pin mode, press [PIN].
Otherwise, proceed to step 15.
14
Enter the PIN, and press [Enter].
15
Press [Enter].
To continue to register or edit address book destinations, repeat the procedure from step 5.