Konica Minolta bizhub 28e bizhub 28e Scan Fax Guide - Page 47
Duplex scan, Select [Long Edge] or [Short Edge], and press [Enter].
View all Konica Minolta bizhub 28e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Duplex scan You can easily scan a two-sided document using this mode. Just load the duplex document in the automatic document feeder, and press . NOTE • This setting is only available with the automatic document feeder. • You cannot scan duplex document when both 600 dpi resolution (page 1-21) and color scan (page 1-22) are set. 1 Press [Scan] on My MFP Menu screen. If My MFP Menu screen is not displayed, press repeatedly until "Scan Ready" screen is displayed. 2 Press [Advanced]. 3 Press [Duplex Scan]. 4 Select [Long Edge] or [Short Edge], and press [Enter]. • Select [OFF] to deselect the setting. • Refer to the display and set the document in the right direction. 5 Press [Close]. 6 Specify the destinations, and press . • For details on the procedure, see "Basic scanning" (page 1-2). • The display shows "Set next document." when scanning is over. 2-14 Advanced scan functions