Konica Minolta bizhub 28e bizhub 28e Scan Fax Guide - Page 213

Error messages When a communication error occurs or there is a problem with the machine, the information lamp will illuminate in orange and an error message will be displayed or printed. There are errors which you can and cannot clear when you press . Please solve the problem which cannot be cleared by pressing with the help of the error message. When the error is cleared, the information lamp turns off. Errors that will clear by pressing : • Communication errors • When the memory becomes full while receiving faxes • When the memory becomes full while storing a document Errors that will not clear by pressing : • When the paper runs out or when a paper jam or document jam occurs • When the toner runs out • When a cover or cassette is open • When a fatal error occurs in the machine Communication errors When a communication error occurs, a message indicating the cause and countermeasure for the error is printed. Check the error code and message, and solve the problem. „„ Fax communication errors Error code Error message Countermeasure D.0.1 Sending stopped. Please try again. Transmit the document again. D.0.2 The line was busy. Please try again. D.0.3 Fax job was cancelled by user. D.0.7 Check condition of remote fax. Check the fax reception method used by the receiving party. D.0.8 No dial tone detection. Check line Check whether the modular cable is connected connection. correctly. Check the dial tone detection settings in the user install mode. Check the location where the pause is entered, and transmit the document again. These symbols may not be required, depending on the switchboard. T.1.1 Confirm the remote fax. Check the correct fax number and transmit the document again. T.1.4 Fax job was cancelled by user. Transmit the document again. T.2.1 Confirm the remote fax. Check the settings on the other machine. 8-2 Error messages