Konica Minolta bizhub 28e bizhub 28e Scan Fax Guide - Page 206

Function Description Settings Dialing Pause This sets the default dialing interval used when the pause option is input. 0 - 10 Seconds: 2 Seconds Rx Reduction Rate Select from "Auto" which automatically selects the Auto magnification according to the length of the document 100 % 1 being received, or "100%" to have all faxes printed out at the same rate of reduction. Reduction Margin For details, see "List of recording methods" (page 3-22). This sets at what point the document printout will 0 - 3.3 ": 2 extend to the following page if the document being 1.6 " received cannot fit within the effective recordable area. For details, see "Reduction margin" (page 3-23). 3 Paper Saving This sets the print method for received documents. OFF Duplex Rx 4 Quick Memory Tx If this is set to "ON", fax transmission for multiple OFF documents will begin in order of page when it has ON been scanned and stored. 5 ECM Mode This mode enables any part of a fax that was OFF not transmitted correctly due to a line error will ON automatically be resent. (The destination machine 6 must also have the same function.) Machine settings Service Mode Do not set this. OFF ON 7 Prefix By registering frequently used fax numbers, you can (Not registered) enter a fax number simply by pressing a button. Up to 40 digits can be entered for a prefix number. Numbers, #, *, /P (Pause), and /T (Tone) can be entered. For details, see "Dialing options" (page 3-10). Receive Time Stamp Prints the time that documents are received. This enables you to accurately manage the arrival time of received documents. OFF ON Auto Print Journal You can print a list of communication jobs. OFF ON Reserve print Journal Line Up You can select whether to arrange printed journal reports in order of job or in order of communication number. Duplex: OFF ON OFF ON NOTE Underlined values are the default settings specified at the time of shipment. Specifying default settings 7-43