Konica Minolta bizhub 28e bizhub 28e Scan Fax Guide - Page 17
Scanning to an FTP server by directly specifying
View all Konica Minolta bizhub 28e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Scanning to an FTP server by directly specifying it 1 Load the document. 2 Press [Scan] on My MFP Menu screen. If My MFP Menu screen is not displayed, press repeatedly until "Scan Ready" screen is displayed. 3 Set the resolution and color, as necessary. For details, see "Resolution" (page 1-21) and "Color" (page 1-22). 4 Press [PC/USB], and then [FTP]. 5 Press [Host]. 6 Press [Link]. 7 Enter the link to the FTP server, and press [Enter]. • Start the link with two slashes For details on entering characters, see chapter 1, "Entering characters" in the Administrator's Guide. 1-10 Basic scanning
1-10
Basic scanning
±
Scanning to an FTP server by directly specifying it
1
Load the document.
2
Press [Scan] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Scan Ready” screen
is displayed.
3
Set the resolution and color, as necessary.
For details, see
“Resolution” (page 1-21)
and
“Color” (page 1-22)
.
4
Press [PC/USB], and then [FTP].
5
Press [Host].
6
Press [Link].
7
Enter the link to the FTP server, and press [Enter].
•
Start the link with two slashes (“//”).
•
For details on entering characters, see chapter 1, “Entering characters” in the
Administrator’s Guide.