Konica Minolta bizhub 28e bizhub 28e Scan Fax Guide - Page 191

Initial setup (User Install) In some countries you are required by law to indicate the sender name and fax number on every fax you send. YOU MUST THEREFORE STORE THE SENDER NAME AND FAX NUMBER IN YOUR MACHINE BEFORE USING IT. Every fax page you send arrives at the receiving machine with a single line of text at the very top of the page. This text lists a sender name, called the Transmit Terminal Identifier (TTI), and a fax number. Under "User install", you can setup the following items including your name and fax number. These settings can be changed at any time. Language Select the language to use. Current date and time Set the correct date and time. This setting is applied to all fax operations, such as the delayed transmission and communication management options. Communication line Set the dialing type needed for transmission, either "Tone" or "Pulse". If the wrong setting is made, telephoning and faxing cannot be performed. Automatic daylight saving time detection Adjust the clock automatically in the summer time period. Broadcasting Set the broadcast transmission option. Fax reception mode Select the desired reception mode from the Fax mode, Tel/Fax mode, Fax/Tel mode, Answering/Fax mode, or Tel mode options. For details on the reception modes, see "Receiving faxes" (page 3-18). Dial tone detection Set the dial tone detection. Sender name (TTI) registration This makes it easy to show the sender's name to the receiving party, to print the name on the document received by the receiving party, and for the receiving party to know where the document came from. Up to 22 characters can be entered, and three names can be registered. Default TTI The most commonly-used TTI among three possible registered TTIs can be designated as the default TTI. Your fax number The fax number of this machine can be told to the receiving party, or printed on the document received. Up to 20 digits can be entered. 7-28 Initial setup (User Install)