Konica Minolta bizhub 28e bizhub 28e Scan Fax Guide - Page 121

Confirmation dial When the confirmation dial function is set, a screen requiring you to reenter the destination will be displayed at transmission. Transmission is allowed only when the first and second enter match. Entering the destination twice enables you to check whether there has been a mistake when entering the number. There are two types of confirmation settings: • Confirm Speed-Dial This will allow you to prevent sending faxes to undesired destinations by mistake, by reentering the destinations that are entered using the speed-dial number and one-touch keys. • Confirm Numeric keys This will allow you to prevent sending faxes to undesired destinations by mistake, by reentering the fax numbers. When the destination includes a dialing option like pause (/P), you need to re-enter it exactly as entered previously including the dialing option. NOTE When using manual transmission (page 3-4), the confirmation dial function is disabled, even if you set it to ON. 1 Press [Setting] on My MFP Menu screen. If My MFP Menu screen is not displayed, press repeatedly until My MFP menu screen is displayed. 2 Press [Management]. If an administrator password is set, enter the password and press [Enter]. 3 Press [Security Communication]. 4 Select [Confirm Speed-Dial] or [Confirm Numeric keys] you want to set. 5 Select [ON] to perform the confirm dial function, and press [Enter]. Select [OFF] to deselect the setting. 6 Press [Close]. 4-24 Security fax functions