Konica Minolta bizhub 3602P bizhub 3602P User Guide - Page 113
Upgrading and migrating, Hardware, Available internal options, Accessing the controller board - firmware
View all Konica Minolta bizhub 3602P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Upgrading and migrating 113 Upgrading and migrating Hardware Available internal options • User Flash • Font cards • Firmware cards - Bar Code - IPDS Accessing the controller board CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet, and then from the printer. 3 Using a flat-head screwdriver, open the controller board access cover. Warning-Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board components or connectors.