Konica Minolta bizhub 3602P bizhub 3602P User Guide - Page 39
Wireless, Speed, Duplex, All IPv6 Addresses, Reset Print Server, Network Job Timeout, Banner - factory reset
View all Konica Minolta bizhub 3602P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Understanding the printer menus 39 Menu item Description Speed, Duplex Show the speed of the currently active network card. IPv4 Show the IPv4 address. All IPv6 Addresses Show all IPv6 addresses. Reset Print Server Start Reset all active network connections to the printer. Note: This setting removes all network configuration settings. Network Job Timeout Off On* (90 seconds) Set the time before the printer cancels a network print job. Banner Page Off On* Print a banner page. Note: An asterisk (*) next to a value indicates the factory default setting. Wireless Note: This menu is available only in printers connected to a wireless network. Menu item Setup On Printer Panel Choose Network Add Wi-Fi Network Network Name Network Mode Infrastructure* Ad hoc Wireless Security Mode Disabled* WEP WPA2/WPA - Personal WPA2 - Personal Wi‑Fi Protected Setup Start Push Button Method Start PIN Method Description Configure the wireless connection using the control panel. Establish a wireless network and enable network security. Notes: • Start Push-Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time. • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point.