Konica Minolta bizhub 3602P bizhub 3602P User Guide - Page 114
Installing an optional card, CAUTION-SHOCK HAZARD, Warning-Potential Damage
View all Konica Minolta bizhub 3602P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Upgrading and migrating 114 4 Close the access cover. 5 Connect the power cord to the printer, and then to the electrical outlet. 6 Turn on the printer. Installing an optional card CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet, and then from the printer. 3 Open the controller board access cover. Warning-Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any components or connectors. 4 Unpack the optional card. Warning-Potential Damage: Do not touch the connection points along the edge of the card.