Konica Minolta bizhub 42 bizhub 36/42 Fax Operations User Guide - Page 46
If the [Additional Port Information Required] or [Information for Additional Port Required] dialog
View all Konica Minolta bizhub 42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
5.3 Installation using Add Printer Wizard 5 5 Click [Add a local printer]. The [Choose a printer port] dialog box appears. 6 Click [Create a new port:], and then select [Standard TCP/IP Port] as the type of port. 7 Click [Next]. 8 Specify the IP address and port. % To use the LPR/Port9100 protocol, select [TCP/IP Device], and then enter the IP address. 9 Click [Next]. % If the [Additional Port Information Required] or [Information for Additional Port Required] dialog box appears, go to Step 10. % If the [Install the printer driver] dialog box appears, go to Step 13. 10 Select [Custom], and then click [Settings...]. 11 Change the settings according to the port, and then click [OK]. % For LPR connection, select [LPR], and then enter [Print] in the [Queue Name:] box. % You must discriminate between upper and lower case letters when entering it. % For Port9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port Number:] box. 12 Click [Next]. The [Install the printer driver] dialog box appears. 13 Click [Have Disk...]. 14 Click [Browse...]. 15 Select a desired fax driver folder on the CD-ROM, and then click [Open]. % Select a folder according to the fax driver, operating system, and language to be used. 16 Click [OK]. The [Printers] list appears. bizhub 42/36 5-12