Kyocera FS 1900 Operation Guide - Page 147
Print Quality Problems, Toner, Container Replacement, Cleaning - blank pages
UPC - 783310458241
View all Kyocera FS 1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Print Quality Problems Print Quality Problems As the following table shows, there are many possible causes of print quality problems, such as blank output as. The troubleshooting procedure for each type of problem is explained below. If you still can not solve the problem, contact your Kyocera Mita dealer. Printed Results Completely blank printout Corrective Action Check the developer unit. Open the printer top cover and check that the developer unit is inserted correctly and check that the developer's connector is connected properly. Check the toner container. Open the printer top cover and check that the toner container is correctly installed in the printer. See Toner Container Replacement on page 3-2. All-black printout Check the charger unit. Open the printer left cover and check that the charger unit is correctly installed. Dropouts, horizontal streaks, stray dots Clean the charger wire. Open the printer left cover. Pull the cleaning knob (green colored) slowly in and out a few times. See Cleaning on page 3-9. (Continued on next page) 4-3