Kyocera FS 1900 Operation Guide - Page 41
>>X Dimension, Entering the Width and Length
UPC - 783310458241
View all Kyocera FS 1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Paper Handling Entering the Width and Length Then, use the following procedure to set the paper size. Enter the paper size for X Dimension and Y Dimension as shown in the figure. Y Dimension 210 to 356 mm (8.27 to 14.02 inches) 148 to 216 mm (5.83 to 8.5 inches) X Dimension 1 When the unit of measurement is set, press the key. >>X Dimension appears as shown below (the paper width setting). >>X Dimension 216 mm 2 Press the ENTER key. A blinking cursor ( ) appears. >>X Dimension 216 mm 3 Press the or key to increase or decrease the value of the figure where the cursor is blinking and display the desired width. The width can be set between 148 and 216 mm (5.83 to 8.5 inches). You can use the > and < keys to move the cursor right and left. 4 Display the paper width and press the ENTER key. 5 When the width is set, press the key. >>Y Dimension appears (the paper length setting). Set the desired length in the same way as the width. The length can be set between 210 and 356 mm (8.27 to 14.02 inches). 6 Display the paper length, press the ENTER key. 1-27