Kyocera FS 1900 Operation Guide - Page 33
Network Card Interface Status - manual
UPC - 783310458241
View all Kyocera FS 1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Printing Test Pages Network Card Interface Status Page Option To use this function, the network interface card must be installed on the printer. You can print out a status page for the network interface. The network interface card status page shows the firmware version, the network addresses, and other information under various network protocols about the network interface card. The default setting is On (print). If the setting is changed to Off (not print) as follows, however, the network interface status page will be printed when the printer status page is printed. Printing out a network interface card status page may not be possible with some network interface cards. For details, see the manual for the Note network interface card. 1 Press the MENU key. 2 Press the or key repeatedly until Interface > appears. Interface > Parallel 3 Press the ENTER key. A blinking question mark (?) appears. Interface ? Parallel If you want to abandon the interface selection procedure, press the CANCEL key. The interface remains unchanged. 4 Press the or key repeatedly until Option appears. Interface ? Option 5 Press the ENTER key again. A > appears. Interface > Option 6 Press the > key and then press the or key repeatedly until the message display indicates >Opt. StatusPage. >Opt. StatusPage On 1-19