Kyocera FS 1900 Operation Guide - Page 91
>Baud Rate, >Data Bits, >Stop Bits, >Parity, >Protocol, DTRpos.&XON
UPC - 783310458241
View all Kyocera FS 1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Interface 6 Press the > key. Each time the or key is pressed, the setting item and current setting change as shown below. >Baud Rate 9600 Definable baud rates: 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200 >Data Bits 8 Definable data bits: 7, 8 (default) >Stop Bits 1 Definable stop bits: 1 (default), 2 >Parity None Definable parity: None (default), Odd, Even, Ignore >Protocol DTR(pos.)&XON Definable protocol: DTR(pos.)&XON (default), DTP(positive), DTR (negative), XON/XOFF, ETX/ACK 7 Display the setting item to be changed and press the ENTER key. A question mark (?) appears. The following example explains how to change the baud rate. The settings for other items can be changed in a similar manner. >Baud Rate ? 9600 8 Press the or key to display the desired setting. The setting changes as shown below. The baud rate can be selected from 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, and 115200. Some computers may not be compatible with a baud rate of 115200 bps. If you set the baud rate to 115200 and communication problems occur, Note lower the baud rate. 9 Display the desired baud rate and press the ENTER key. 10 Press the MENU key. The message display returns to Ready. 1-77