Kyocera FS 1900 Operation Guide - Page 30
Software Version, Hardware Information, Memory, Installation Options, Network Status, Emulation - printer software
UPC - 783310458241
View all Kyocera FS 1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Printing Test Pages 1 - Software Version This information shows the firmware version and date of issue of the printer. 2 - Hardware Information This information shows various printer settings, such as the size and type of the paper in the paper cassettes. 3 - Memory This shows the amount of total memory installed in the printer, the amount of currently available memory, and the current status of the RAM disk. See Operating the Storage Device on page 1-81. 4 - Page Information This shows the print resolution, number of copies, and the total page count. 5 - Installation Options This shows the option(s) installed in the printer. 6 - Network Status This shows the IP address, Subnet Mask address, and Default Gateway address for the network interface card installed in the printer. 7 - Emulation This shows all available emulations of the printer. The printer is shipped from the factory with PCL 6 emulation selected as the default. 8 - Error Log This shows the last three instances of the following four types of errors, listing them in the order of their occurrence: KPDL Error Press GO; Memory overflow Press GO; Print overrun Press GO; File not found Press GO. The most recent error is displayed on the top line of the Error Log. For error remedies, see section Error Messages on page 4-10. Error information is cleared when the printer's power is turned off. 9 - Toner Gauge This shows the approximate level of remaining toner. When the value is 100, the toner container is full. 1-16