Kyocera FS 1900 Operation Guide - Page 209
RS-232C/RS-422A Protocol, H1: Baud rate, H2: Data bits, H3: Stop bits, H4: Parity
UPC - 783310458241
View all Kyocera FS 1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
RS-232C/RS-422A Protocol RS-232C/RS-422A Protocol A protocol is a set of rules the computer follows in sending data to the printer. The RS-232C/RS-422A parameters are stored in battery backed-up memory. They are indicated on the status printout. They can be changed by the FRPO (firmware reprogram) command described in the Programming Manual provided on the CD-ROM supplied with the printer. The parameters and their identification codes are given below. H1: Baud rate Parameter value 12 24 48 96 19 38 57 11 Baud rate 1200 2400 4800 9600 19200 38400 57600 115200 The factory setting is 9600 baud. H2: Data bits 7 or 8, factory-set to 8. H3: Stop bits 1 or 2, factory-set to 1. H4: Parity Parameter value 0 1 2 3 Meaning None Odd Even Ignore The factory setting is "None" (0 on the status printout). C-9