Kyocera KM-1500 KM/CS-1500 Operation Guide Rev-2.0 - Page 32
Attaching the face-up tray, NOTES, IMPORTANT
View all Kyocera KM-1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Section 3 PREPARATIONS Attaching the face-up tray When copying onto special paper, such as thick paper (90 g/m² - 163 g/m²) and OHP transparencies, ALWAYS use the face-up tray. The face-up tray has a storage capacity of 30 sheets of standard copy paper (80 g/m²) but only 1 sheet of special paper should be stored there at one time. 2 Perform the standard copying procedure. Finished copies will be ejected onto the face-up tray. 1 Open the face-up tray (located at the rear of the copier). NOTES • Finished copies will be ejected face-up. • Copies will be stored in reverse order on the face-up tray. IMPORTANT! ALWAYS be sure to close the face-up tray after use. NEVER leave the face-up tray open. 3-10
Section 3
PREPARATIONS
3-10
When copying onto special paper, such as thick paper (90 g/m² –
163 g/m²) and OHP transparencies, ALWAYS use the face-up tray.
The face-up tray has a storage capacity of 30 sheets of standard
copy paper (80 g/m²) but only 1 sheet of special paper should be
stored there at one time.
1
Open the face-up tray (located at the rear of the copier).
2
Perform the standard copying procedure. Finished copies
will be ejected onto the face-up tray.
NOTES
•
Finished copies will be ejected face-up.
•
Copies will be stored in reverse order on the face-up
tray.
IMPORTANT!
ALWAYS be sure to close the face-up tray after use.
NEVER leave the face-up tray open.
Attaching the face-up tray