Kyocera KM-1500 KM/CS-1500 Operation Guide Rev-2.0 - Page 46
Selecting the borderline, Press the Recall%/Enter key.
View all Kyocera KM-1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Section 5 COPY FUNCTIONS 3 Press the Start key. Scanning of the first original will start. Selecting the borderline Perform the following procedure when you want to change the type of borderline. NOTE If the optional Document Processor is installed on your copier, all of the originals set there will be scanned and the copy operation will start. 4 Once scanning of the first original is completed, "1-" (the number of originals already scanned) will be shown. Set the next original and press the Start key. Carry out this step as well for the rest of the originals that you want to copy. 1 Press down on the 2in1/4in1 key for at least 3 seconds. 5 Once you have finished scanning all of the originals, press the Recall%/Enter key or the 2in1/4in1 key. Copying will start. 2 Press the Number of Copies / Zoom(+) or the Number of Copies / Zoom(-) key until "F18" (Default item: Borderline) is shown. 3 Press the Recall%/Enter key. 5-6