Kyocera KM-1500 KM/CS-1500 Operation Guide Rev-2.0 - Page 53
number, Default, Description, Available settings, Reference, Non-Standard Size Paper Width
View all Kyocera KM-1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Section 6 COPY DEFAULT SETTINGS Item number F14 F15 F16 F17 F18 F19 F20 Default Multi-Bypass Tray Paper Size Non-Standard Size Paper Width Copy Limit 4-in-1 Layout Order Borderline Silent Mode Time Auto Clear ON/OFF Description Available settings Registers the size of paper that is to be set on the multi-bypass tray. * The "XXX" shown here refers to the actual width of the paper as registered under the "Non-Standard Size Paper Width" and it is that number which will be shown on the display. Sets the width of the paper to be set on the multi-bypass tray when that paper is of a non-standard size. * Non-standard size paper of up to 14", or 356 mm, in length can be used. Sets the maximum number of copies or copy sets that can be made at one time. Sets the default order in which the images will appear within the copy page in the 4-in-1 Layout mode (see page 5-1). * Select from between code numbers 1 and 2 when making copies length-wise, and from between code numbers 3 and 4 when making copies width-wise. Sets the default borderline that will be used in the Layout modes (see page 5-1). Sets the amount of time after each copy job is finished until the Silent mode automatically engages and shuts down the motor inside the copier. If you set this value to "0" seconds, the motor will be stopped immediately after copying is completed. Sets whether the Auto Clear function (see page 2-5), which returns the copier to its initial mode settings when a pre-set amount of time elapses after each copy job is finished, will engage automatically or not. -A4: A4 -A5: A5 -A6: A6 -Fo: Folio -Lg: Legal -St: Statement -Lt: Letter -o2: Oficio II XXX: Non-Standard Size (Inch specification default: Letter) (Metric specification default: A4) Inch specification: 4.13 - 8.50 (Default: 4.13) Metric specification: 105 - 216 mm (Default: 105 mm) 1 - 99 (Default: 99) 1-: 1 2 2-: 1 3 34 24 3-: 1 2 4-: 1 3 34 24 (Default: 1-) 1-: None* 2-: Solid line 3-: Dotted line 0/5/10/15/30 (seconds) (Default: 10 seconds) ON* OFF Reference page 6-6 6-9 6-6 6-7 6-6 6-8 6-6 6-9 6-6 6-9 6-6 6-9 6-6 6-7 6-3