Kyocera KM-1500 KM/CS-1500 Operation Guide Rev-2.0 - Page 33
BASIC OPERATION, Basic copying procedure
View all Kyocera KM-1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Section 4 BASIC OPERATION Basic copying procedure 1 Warm-up Turn the power switch ON ( | ). At the end of warm-up, the Start indicator will light. 4 Selecting the image quality The image quality mode can be selected according to the type of original. Press the image quality select key to light the indicator for one of the following image quality modes. Auto Exposure Adjustment mode: Make sure the Auto Exp. indicator is lit. Text & Photo mode (Originals with both text and photos): Make sure the Text & Photo indicator is lit. Photo mode (Originals with mainly photos): Make sure the Photo indicator is lit. Text mode (Originals with mainly text): Make sure the Text indicator is lit. 2 Selecting the desired functions Select from the copier's various functions. 3 Selecting the source of paper feed Select the location of the paper that you want to copy onto. Press the Paper Select key to select either the upper drawer, the Paper Feeder (option) or the multi-bypass tray. Selecting the Eco-Copy indicator, and thereby the Eco-Copy mode, will cause the copy exposure to be lightened in order to save on toner use. Select this mode only when high quality copies are not required. NOTE It is possible for you to change the default setting for which drawer will be automatically selected. (See "Default Drawer" on page 6-2.) NOTES • It is possible for you to adjust the default copy exposure in each of the image quality modes. (See "Auto Exposure Adjustment", "Text & Photo Mode Exposure Adjustment", "Photo Mode Exposure Adjustment" and "Text Mode Exposure Adjustment" on page 6-1.) • It is also possible for you to select which image quality mode will be the default setting in the initial mode. (See "Image Quality Mode" on page 6-1.) 4-1