Lexmark 11N1000 User's Guide - Page 116
Received fax has poor print quality, Caller ID information is not displayed, Fax Error
UPC - 734646043731
View all Lexmark 11N1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Check cartridges 1 Remove the print cartridges. 2 Make sure the sticker and tape have been removed. 1 2 3 Reinsert the print cartridges. Received fax has poor print quality These are possible causes and solutions. Try one or more of the following: Review checklist for sender • Check that the quality of the original document is satisfactory. • Resend the fax. There may have been a problem with the quality of the telephone line connection. • Increase the fax scan resolution. Check ink Check the ink levels, and install a new print cartridge if necessary. Clean scan lens and white roller 1 Unplug the power cord and the phone line from the wall. 2 Open the control panel. 3 Push the roller lever gently to the left, pull it forward, and then lift the white roller out of the printer. 4 Use a clean, lint-free cloth dampened with water to wipe the white roller and the scan lens. Note: The scan lens is located under the white roller. 5 Reinstall the dry white roller, push the roller lever gently to the left, and then snap it in to place. 6 Reconnect the power cord and the phone line. Caller ID information is not displayed Caller ID pattern may not be set correctly The printer supports two distinct Caller ID patterns: Pattern 1 (FSK) and Pattern 2 (DTMF). Depending on the country or region you live in and the telecommunications company you subscribe to, you may need to switch the pattern for the printer to display Caller ID information. For more information, see "Changing Caller ID pattern using the control panel" on page 52. Fax Error The fax machines have stopped communicating. Resend the fax. There may have been a problem with the quality of the telephone line connection. 116