Lexmark 13L0180 Lexmark 4227 User's Guide - Page 132

Display Messages

Page 132 highlights

Solving Printer Problems Display Messages Message Ready (IBM) Ready (EPSON) 001 Paper Empty/ Add Paper 002 Paper Jam Remove Paper 005 Cover Open Close Cover 007 Data Error 00D I/F Error 6XX Machine Chk FastDraft Draft Gothic Description The printer is online and ready to accept data, and IBM PPDS mode is selected. The printer is online and ready to accept data, and Epson emulation mode is selected. The printer is out of paper or the paper is not loaded properly. Load paper in the printer. For help, see "Selecting and Loading Paper" on page 55. Clear paper jam. Remove any debris from inside the printer. Top Cover is open or not properly closed. Close the top cover. Data transmission error in Serial Interface. Check the serial settings on the function menu to make sure they are correct. Check that the serial cable is properly connected at both ends. Interface mode switch was changed after the printer was turned on. Return the printer to the appropriate interface mode (RS-232 or RS-422). A Hardware error occurred. If this happens, turn off the printer, fix the paper jam or other problem, then turn the printer back on. If the error occurs again, contact your point of purchase, or see the printer registration card for the number appropriate for your country. FastDraft font is selected. Draft font is selected. Gothic font is selected. 126 Chapter 6: Solving Printer Problems

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160

Chapter 6: Solving Printer Problems
126
Solving Printer Problems
Display Messages
Message
Description
Ready (IBM)
The printer is online and ready to accept data, and IBM PPDS
mode is selected.
Ready (EPSON)
The printer is online and ready to accept data, and Epson
emulation mode is selected.
001 Paper Empty/
Add Paper
The printer is out of paper or the paper is not loaded
properly. Load paper in the printer. For help, see “Selecting
and Loading Paper” on page 55.
002 Paper Jam
Remove Paper
Clear paper jam. Remove any debris from inside the printer.
005 Cover Open
Close Cover
Top Cover is open or not properly closed. Close the top
cover.
007 Data Error
Data transmission error in Serial Interface. Check the serial
settings on the function menu to make sure they are correct.
Check that the serial cable is properly connected at both ends.
00D I/F Error
Interface mode switch was changed after the printer was
turned on. Return the printer to the appropriate interface
mode (RS-232 or RS-422).
6XX Machine Chk
A Hardware error occurred. If this happens, turn off the
printer, fix the paper jam or other problem, then turn the
printer back on. If the error occurs again, contact your point
of purchase, or see the printer registration card for the
number appropriate for your country.
FastDraft
FastDraft font is selected.
Draft
Draft font is selected.
Gothic
Gothic font is selected.