Lexmark 2380 Service Manual - Page 102

Left Side Frame Removal 1. Remove the tractor assembly see "Push Tractor Assembly Removal" on page 4-53. 2. Remove the top cover see "Top Cover Removal" on page 4-61. 3. Remove the pull tractor actuator see "Pull Tractor Actuator Removal" on page 4-51. 4. Remove the printhead see "Printhead Removal" on page 4-48. 5. Remove the sub logic board see "Sub Logic Board Removal" on page 4-59. 6. Remove the paper feed motor and paper feed motor plate see "Paper Guide / Platen Assembly Removal" on page 4-40. 7. Remove the carrier motor assembly see "Carrier Motor Assembly Removal" on page 4-16. 8. Remove the carrier see "Carrier Removal" on page 4-12. 9. Remove the upper feed roller see "Upper Feed Roller Removal" on page 4-66. 10. Remove the lower pinch roller see "Lower Pinch Roller Removal" on page 4-32. 11. Remove the print unit see "Print Unit Removal" on page 4-47. 12. Remove the home position sensor see "Home Position Sensor Removal" on page 4-25. 13. Remove the pull tractor sensor see ""Pull Tractor Sensor Removal" on page 4-52. 14. 238X-001 - Remove the head gap sensor see "Head Gap Sensor Removal (238X-001)" on page 4-23. 23XX-002, 003 - Remove the head gap sensor assembly see "Head Gap Sensor Removal (23XX-002, 003)" on page 4-24. 15. Remove the large idler gear [7] by inserting a small blade screwdriver between the gear and the side frame and twisting. 16. 23XX-002, 003 - Remove the screw [8] that was covered by the gear and remove the metal support plate. Remove the platen bar screw [8] that was covered by the support plate. 23XX-001 printers have only one screw to remove. 17. 238X-XXX - Remove the idler gear [1]. 18. Remove the lower left feed roller gear [2]. 19. Release the latch, and then remove the left lower bushing [3]. 4-28