Lexmark 2380 Service Manual - Page 19
Serial Interface Adapters, General Information 1-7, 23XX-001, Notes
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Serial Interface Adapters The 23XX printer product line uses three different serial adapters. • 23XX-001: • Snaps on back of the printer and plugs into the parallel port. • Power lead plugs into the printer's +5 V port. • Switch settings are for "Snap-On". • 23XX-002: • In-line gray box with a short cable to the parallel port. • Some units have a separate power lead to the +5 V port. • Units without the power cord will not work on the 23XX-001. • Switch settings are for "Gray". • 23XX-003: • Similar to the 23XX-002, but different switch definitions. • All units have a power lead. • Switch settings are for "Black". Notes: • Except as noted, all adapters work with all printers. • Some adapters may be installed on printers other than what is listed. • Only the "Black" adapter is available as a FRU. • Changes to switch settings are valid only after printer power is turned off and then on again. • Contact Lexmark Technical Support for questions about serial adapters. General Information 1-7