Lexmark 2380 Service Manual - Page 128
Ribbon Drive Rack Gear Removal, Release the snap
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Ribbon Drive Rack Gear Removal 1. Remove the top cover see "Top Cover Removal" on page 4-61. 2. Move the forms thickness lever to position 1. 3. Position the carrier midway between the two rack mounting tabs [1] shown. 4. Remove the stop [2], if present. 5. Release the snap [3] and move the rack [4] to the right. 6. Press the tab on the right, and move the rack down to disengage the rack from the ribbon drive gear. 4-54
4-54
Ribbon Drive Rack Gear Removal
1.
Remove the top cover
see
“Top Cover Removal” on page 4-61
.
2.
Move the forms thickness lever to position 1.
3.
Position the carrier midway between the two rack mounting tabs
[
1
] shown.
4.
Remove the stop [
2
], if present.
5.
Release the snap [
3
] and move the rack [
4
] to the right.
6.
Press the tab on the right, and move the rack down to
disengage the rack from the ribbon drive gear.