Lexmark 2380 Service Manual - Page 114

Paper Guide / Platen Assembly Removal 1. Remove the tractor assembly see "Push Tractor Assembly Removal" on page 4-53. 2. Remove the top cover see "Top Cover Removal" on page 4-61. 3. Remove the pull tractor actuator see "Pull Tractor Actuator Removal" on page 4-51. 4. Remove the paper select lever see "Paper Select Lever Removal" on page 4-42. 5. Remove the printhead see "Printhead Removal" on page 4-48. 6. Remove the sub logic board see "Sub Logic Board Removal" on page 4-59. 7. Remove the paper feed motor see "Paper Feed Motor Removal" on page 4-38. 8. Remove the carrier see "Carrier Removal" on page 4-12. 9. Remove the tractor idler gear. 10. 23XX-001 - Remove the platen bar screw that was covered by the gear. 23XX-002, 003 - Remove the rear support plate mounting screw that was covered by the gear. Remove the metal support plate mounting screw and the support plate. Remove the platen bar screw that was covered by the support plate. 11. Remove the upper feed roller see "Upper Feed Roller Removal" on page 4-66. 12. Remove the lower pinch roller see "Lower Pinch Roller Removal" on page 4-32. 13. Remove the gears on the side frame (right) see "Right Side Frame Gears Removal" on page 4-58. 14. Remove the print unit see "Print Unit Removal" on page 4-47. 15. Remove the right side frame see "Right Side Frame Removal" on page 4-56. 16. Remove the lower feed roller see "Lower Feed Roller Removal" on page 4-30. 17. Release the two latches [1] on the left side of the paper guide [2], and then remove the assembly from the left side frame. 18. Perform the Printhead-to-Platen Gap adjustment see "Printhead-to-Platen Gap Adjustment" on page 4-2. 4-40