Lexmark 2380 Service Manual - Page 66
Beeps and Tractor 2 LED blinks 3 times
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3 Beeps and Tractor 2 LED blinks 3 times Tractor 2 selected from operator panel but printer does not detect Tractor 2 or detects that the Tractor 2 mechanism is not installed. FRU Action 1 Tractor 2 Check the Tractor 2 in-place sensor or the Board/Cable Asm. cable connection. The in-place sensor actuator extends through the Tractor 2 cover and rests on the printer cover when Tractor 2 is installed. Remove the Tractor 2 cover and make sure the in-place sensor opens when the Tractor 2 is installed. The voltage at Tractor 2 CN1-13 should be +5 V dc with the sensor open and 0 with it closed. Replace the Tractor 2 board/cable asm if the sensor signal is wrong. 2 Main Logic Board For information on the Tractor 2 cable connectors, see "Tractor 2 Cable Connectors" on page 5-4. Check the cable connection from Tractor 2 to the printer. If possible, try the Tractor 2 with another printer to determine if the problem is the Tractor 2 board/cable assembly or the printer main logic board. 2-42