Lexmark 2380 Service Manual - Page 117
Paper Select Sensor Removal, Repair Information 4-43
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Paper Select Sensor Removal 1. Remove the top cover see "Top Cover Removal" on page 4-61. 2. Remove the print unit see "Print Unit Removal" on page 4-47. 3. Using diagonal pliers, cut 4 mm off the ends of the last two ribs on the paper guide to allow better screwdriver access. If necessary, also remove the molded hook on the paper guide. 4. Use a #1 Phillips screwdriver to remove the screw [1] and the sensor [2]. Disconnect the sensor connector from the sub logic board. Repair Information 4-43
Repair Information 4-43
Paper Select Sensor Removal
1.
Remove the top cover
see
“Top Cover Removal” on page 4-61
.
2.
Remove the print unit see
“Print Unit Removal” on page 4-47
.
3.
Using diagonal pliers, cut 4 mm off the ends of the last two ribs
on the paper guide to allow better screwdriver access. If
necessary, also remove the molded hook on the paper guide.
4.
Use a #1 Phillips screwdriver to remove the screw [
1
] and the
sensor [
2
]. Disconnect the sensor connector from the sub logic
board.