Lexmark 2380 Service Manual - Page 112
Paper Feed Motor Removal
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Paper Feed Motor Removal 1. Remove the top cover see "Top Cover Removal" on page 4-61. 2. Remove the sub logic board see "Sub Logic Board Removal" on page 4-59. 3. Disconnect the paper feed motor cable [1] from connector CN10 on the main logic board. 4. Remove the screw [3]. 5. Rotate the paper feed motor [2] clockwise, then remove it. The paper feed motor plate [4] can also be removed at this time as it is held in place only by the motor [2]. 238X-001 - The head gap sensor may come loose. It is held in place by the paper feed motor plate. 6. 238X-001 - Be sure the head gap sensor is positioned correctly before installing the paper feed motor plate. 4-38
4-38
Paper Feed Motor Removal
1.
Remove the top cover
see
“Top Cover Removal” on page 4-61
.
2.
Remove the sub logic board
see
“Sub Logic Board Removal” on page 4-59
.
3.
Disconnect the paper feed motor cable [
1
] from connector CN10
on the main logic board.
4.
Remove the screw [
3
].
5.
Rotate the paper feed motor [
2
] clockwise, then remove it. The
paper feed motor plate [
4
] can also be removed at this time as it
is held in place only by the motor [
2
].
238X-001
-
The head gap sensor may come loose. It is held in
place by the paper feed motor plate.
6.
238X-001
-
Be sure the head gap sensor is positioned correctly
before installing the paper feed motor plate.