Lexmark 2380 Service Manual - Page 79
Bidirectional Print Adjustment, Repair Information 4-5, Micro
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Bidirectional Print Adjustment After replacing any mechanical part which affects the operation of the main logic board or the carrier, perform the following procedure to adjust the bidirectional print. Note: This adjustment cannot be completed if the printer runs out of paper, so be sure to use continuous forms. 1. Be sure the ribbon cartridge and continuous forms are installed. 2. Turn the printer on. 3. Press Alt and then press Micro↑. The printer enters Setup Mode. 4. Press the Control Options button. (Button varies with model.) 5. Press the Bidirectional Alignment button. (Button varies with model.) 6. Press Font. The printer prints out the pattern shown below. The first and third lines are printed from left to right. The second and fourth lines are printed from right to left. Repair Information 4-5