Lexmark 2380 Service Manual - Page 110
Paper Empty Sensor And Spring Removal, Push Tractor Assembly Removal
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Paper Empty Sensor And Spring Removal 1. Remove the tractor assembly see "Push Tractor Assembly Removal" on page 4-53. 2. Remove the top cover see "Top Cover Removal" on page 4-61. 3. Remove the print unit see "Print Unit Removal" on page 4-47. 4. Remove the paper select lever see "Paper Select Lever Removal" on page 4-42. 5. Release the four latches [1], and then remove the paper empty sensor. Carefully remove the paper empty sensor cable to avoid cable damage. 6. Disconnect the paper empty sensor cable from the latch on the paper guide. 7. Carefully grasp the paper empty lever at [2] with a pair of needle nose pliers and remove the paper empty lever by pulling it perpendicular away from the paper guide. Do not damage or lose the paper empty sensor spring [3]. 8. Detach the paper empty sensor spring [3]. 4-36