Lexmark 2380 Service Manual - Page 106
Lower Pinch Roller Removal, Top Cover Removal
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Lower Pinch Roller Removal Note: The lower pinch roller and the pinch roller gear must be ordered separately. 1. Remove the top cover see "Top Cover Removal" on page 4-61. 2. Remove the center pinch roller ground spring. 3. Remove the left and right pinch roller springs [1]. 4. Move the carrier to the right as far as it will go. 5. Slide the left end of the lower pinch roller to the front of the printer and lift it up and to the left to remove it. 6. Be sure to perform the Printhead-to-Platen Gap Adjustment procedure see "Printhead-to-Platen Gap Adjustment" on page 4-2. 4-32
4-32
Lower Pinch Roller Removal
Note:
The lower pinch roller and the pinch roller gear must be
ordered separately.
1.
Remove the top cover
see
“Top Cover Removal” on page 4-61
.
2.
Remove the center pinch roller ground spring.
3.
Remove the left and right pinch roller springs [
1
].
4.
Move the carrier to the right as far as it will go.
5.
Slide the left end of the lower pinch roller to the front of the
printer and lift it up and to the left to remove it.
6.
Be sure to perform the Printhead-to-Platen Gap Adjustment
procedure see
“Printhead-to-Platen Gap Adjustment” on page
4-2
.