Lexmark 2380 Service Manual - Page 135
Top Cover Removal, Repair Information 4-61, 23XX-001
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Top Cover Removal 1. Turn the printer off. 2. Disconnect the power cord at the printer. 3. 23XX-001 - Remove the paper advance knob [1] by pulling to the right. 4. If the tractor assembly is installed in the pull tractor position, remove the tractor assembly see "Pull Tractor Removal" on page 4-50. 5. Remove the front cover [2] and the ribbon access cover [3]. 6. Release the two latches [9], and then remove the rear cover [3]. 7. Set the paper select lever [4] to the cut sheet position. 8. Remove the two screws [8]. 9. Stand the printer on its side. Insert a flat blade screwdriver into each of the five holes in the bottom cover and release the five latches that secure the top cover [5] to the bottom cover [6]. Repair Information 4-61
Repair Information 4-61
Top Cover Removal
1.
Turn the printer off.
2.
Disconnect the power cord at the printer.
3.
23XX-001
-
Remove the paper advance knob [
1
] by pulling to
the right.
4.
If the tractor assembly is installed in the pull tractor position,
remove the tractor assembly see
“Pull Tractor Removal” on
page 4-50
.
5.
Remove the front cover [
2
] and the ribbon access cover [
3
].
6.
Release the two latches [
9
], and then remove the rear cover [
3
].
7.
Set the paper select lever [
4
] to the cut sheet position.
8.
Remove the two screws [
8
].
9.
Stand the printer on its side. Insert a flat blade screwdriver into
each of the five holes in the bottom cover and release the five
latches that secure the top cover [
5
] to the bottom cover [
6
].