Lexmark 2380 Service Manual - Page 76
Adjustments, Printhead-to-Platen Gap Adjustment
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Adjustments CAUTION: Be sure to unplug the power cord whenever you are working on the printer with one of the covers removed. Printhead-to-Platen Gap Adjustment WARNING: To prevent damage to the printhead when this adjustment is made, be sure a gap exists between the printhead and the right end of the platen before you turn the printer on. Perform the printhead-to-platen gap adjustment after replacing or disassembling any of the following parts: • Carrier • Platen • Pinch Roller (Lower) • Ribbon Drive Rack Gear • Side Frame (Left) • Side Frame (Right) • Paper Separator • Feed Roller (Lower) • Paper Guide. Note: Make sure the top cover is installed. 4-2
4-2
Adjustments
CAUTION:
Be sure to unplug the power cord whenever you are
working on the printer with one of the covers removed.
Printhead-to-Platen Gap Adjustment
WARNING:
To prevent damage to the printhead when this adjust-
ment is made, be sure a gap exists between the printhead and the
right end of the platen before you turn the printer on.
Perform the printhead-to-platen gap adjustment after replacing or
disassembling any of the following parts:
•
Carrier
•
Platen
•
Pinch Roller (Lower)
•
Ribbon Drive Rack Gear
•
Side Frame (Left)
•
Side Frame (Right)
•
Paper Separator
•
Feed Roller (Lower)
•
Paper Guide.
Note:
Make sure the top cover is installed.