Lexmark 2380 Service Manual - Page 140

Upper Feed Roller Removal, Release the latch and remove the upper bushings

Get Lexmark 2380 - Forms Printer B/W Dot-matrix PDF manuals and user guides View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 140 highlights

Upper Feed Roller Removal 1. Remove the top cover see "Top Cover Removal" on page 4-61. 2. Disconnect the power supply cable from CN1 on the sub logic board. Remove the self-tapping screw that holds the sub logic board and the paper feed motor plate to the left side frame. 3. Remove the tractor idler gear [1] by inserting a small blade screwdriver between the tractor idler gear and the left side frame, and twisting. Bend the paper feed motor plate slightly to the left to remove the gear. 4. Release the latch and move the upper feed roller gear [3] to the left until it touches the paper feed motor plate. It will stay on the feed roller shaft. 5. Release the latch and remove the upper bushings [2]. Move the left bushing to the left; it will stay on the feed roller shaft. 6. Release tab A, and then remove the upper feed roller [4] in the direction indicated by the arrow. The upper feed roll gear and the left upper bushing will come off the feed roller as it is being removed. 4-66

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
4-66
Upper Feed Roller Removal
1.
Remove the top cover
see
“Top Cover Removal” on page 4-61
.
2.
Disconnect the power supply cable from CN1 on the sub logic
board. Remove the self-tapping screw that holds the sub logic
board and the paper feed motor plate to the left side frame.
3.
Remove the tractor idler gear [
1
] by inserting a small blade
screwdriver between the tractor idler gear and the left side
frame, and twisting. Bend the paper feed motor plate slightly to
the left to remove the gear.
4.
Release the latch and move the upper feed roller gear [
3
] to the
left until it touches the paper feed motor plate. It will stay on the
feed roller shaft.
5.
Release the latch and remove the upper bushings [
2
]. Move the
left bushing to the left; it will stay on the feed roller shaft.
6.
Release tab
A
, and then remove the upper feed roller [
4
] in the
direction indicated by the arrow. The upper feed roll gear and
the left upper bushing will come off the feed roller as it is being
removed.