Lexmark 2380 Service Manual - Page 123
Printhead Cables Removal, Repair Information 4-49, Reassembly Note
View all Lexmark 2380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Printhead Cables Removal Note: Be careful not to damage the printhead cables as they are secured with double-sided adhesive tape. 1. Remove the top cover see "Top Cover Removal" on page 4-61. 2. Remove the printhead see "Printhead Removal" on page 4-48. 3. Release the printhead cables from the flexible cable holders. 4. Disconnect the printhead cables [1] from connector CN8 and CN9 (239X), or CN9 (238X) on the sub logic board [2]. Reassembly Note: Be sure the printhead cables are correctly aligned and secured. They must be flat, with no twists. Repair Information 4-49
Repair Information 4-49
Printhead Cables Removal
Note:
Be careful not to damage the printhead cables as they are
secured with double-sided adhesive tape.
1.
Remove the top cover
see
“Top Cover Removal” on page 4-61
.
2.
Remove the printhead
see
“Printhead Removal” on page 4-48
.
3.
Release the printhead cables from the flexible cable holders.
4.
Disconnect the printhead cables [
1
] from connector CN8 and
CN9 (239X), or CN9 (238X) on the sub logic board [
2
].
Reassembly Note:
Be sure the printhead cables are correctly
aligned and secured. They must be flat, with no twists.