Lexmark C530DN Technical Reference - Page 105

3-8 PJL DEFAULT Command This command modifies the default setting for the specified environment variable and stores the setting in the printer NVRAM. The new setting is activated with the occurrence of the next PJL reset condition. Syntax: @PJL DEFAULT [command modifier:value] variable=value[] [command modifier:value] The [command modifier:value] parameter specifies the type of PJL variables to be modified. The variables supported are listed in the tables beginning on page 3-12. • A [command modifier:value] parameter is not required for variables listed in the tables "Common Variables for Both Printer Languages" on page 3-12, and "Printer Unique Variables for Both Printer Languages" on page 3-19. • LPARM:PCL is used with variables specific to PCL emulation. (See the tables "Common Variables for PCL Emulation" on page 3-48, and "Printer Unique Variables for PCL Emulation" on page 3-49.) • LPARM:POSTSCRIPT is used for variables specific to PostScript emulation. (See the tables "Common Variables for PostScript Emulation" on page 3-51, and "Printer Unique Variables for PostScript Emulation" on page 3-52.) • LRESOURCE:"device:filename.filetype" is required for LRESOURCE variables. (See the table "Printer Unique LRESOURCE Variables" on page 3-53.) Values for "device:filename.filetype" are: device flash, flash1, disk, or disk1 (case insensitive) filename A unique identifier for a file, such as the macro ID for a PCL macro, the symbol set ID for a PCL symbol set, the font ID for a PCL font, and so on. The filename is case sensitive. filetype An identifier that categorizes the file, such as p5macro for PCL macros or p5symset for PCL symbol sets. See "Table 3-22: Variables for Flash and Disk File and Password Commands" on page 3-87 for a complete list of the supported file types. The filetype is case sensitive.