Lexmark C530DN Technical Reference - Page 255

4-60 PostScript Table 4-8: Page Device Parameters (Continued) Key PostRenderingEnhance Details Type dictionary PowerSave integer ProcessColorModel name or string Punch integer SlipSheet integer Definition Describes enhancements that are made to the output after the page has been held in memory. REValue is an integer that specifies the current value of the PQET menu item. Supported values are: 0 1 to 4 PQET is Off. PQET is On (default is 1). Type is a constant value. To find the value of Type for your printer, see "PostRenderingEnhanceDetails" on page C-8. A value of 1-120 or 1-240 (model specific) indicates the number of minutes that elapses after the last page prints and before the Power Saver feature is invoked. A value of 0 (zero) indicates the Power Saver feature is turned Off on some printer models. Note: Some printer models released in the year 2000 or later designated as Energy Star printers cannot have Power Saver disabled. This value is initialized at the start of each PostScript emulation job to the value of the Power Saver menu item. Note: This parameter can only be modified within a system administration job. Specifies the color model to use for rendering process colors in the printer. Supported values are: DeviceGray DeviceRGB DeviceCMYK DeviceCMY Requests holes to be punched in the output page. The format for setting the Punch key is: setpagedevice where n is one of the following values: 0 Do not punch holes in the output page. 3 Punch holes in the output page. Specifies where blank separator sheets should be inserted in the output. Supported values are: 0 Do not insert separator sheets. 1 Insert a separator sheet at device deactivation. 2 Insert a separator sheet at the end of the print job. 3 Insert a separator sheet at the end of each set in a multicopy job. If Collate is set to True, a set consists of one copy of each page of the document. For example, if a print job is five pages long, a set is one copy of pages one to five. If Collate is set to False, a set is all the copies of a single page of the job. For example, if a print job is three copies of a five page job, a set is three copies of the first page. 4 Insert a separator sheet after each showpage or copypage.